Access Control Integrated Cabling System Application Notes

When using the integrated wiring system as a transmission line for access control, the following factors should be noted:

The wiring method should be completely in accordance with the wiring rules of various access control devices, and retain the detailed wiring diagram, so as to avoid the pain when judging the line during maintenance.

Shielded twisted pair shields should be grounded according to the reader and controller installation manual.

If you use the network shielded twisted pair transmission TCP/IP, you can completely use the shield termination rules of the shielded integrated wiring system.

When using the TCP/IP protocol, it is best not to share the network switch with other intelligent systems (including office automation systems and other software systems). That is, a separate network switch is provided for the access control system to avoid transmission accidents due to protocol conflicts.

When using the network TCP/IP protocol, the management computer of the access control system can be considered as a server in the access control network, and is connected to the distribution frame using twisted pair or optical cable.

The integrated wiring system can be used for access control systems. This has been confirmed by the suppliers and installers of the access control system. It is only in the project that the cost, construction and performance should be fully evaluated in order to achieve the best results.