The access control system is installed to keep the security block convenient and safe VS convenient

In order to ensure the safety of people's work, study, and family life, many commercial office buildings, schools, and communities are now using smart access control systems. This modern security system combines automatic identification technology with terminal management to control the digital management system for personnel access. Because the security of the password access control system is weak, access control systems using sensing IC cards, biometrics, and the like have gradually become popular. According to different types of access control systems , the specific steps for installation of the access control system are also different. Let me introduce the installation steps of the magnetic card type access control system .

What is an access control system

The access control system is an effective measure to realize security management at the main entrances and exits. It integrates automatic identification technology of microcomputers and modern security management measures into a new modern security management system involving various new technologies.

The access control system is a layer of prevention and protection on the simple doorway and key management. It has gradually developed into a complete access management system. Applicable to the security, personnel assessment and administrative management of banks, houses, hotels, office buildings, factories, etc.

What brand of access control system is good

With the continuous improvement of science and technology, the access control system can achieve more and more functions. Rights management, real-time monitoring, record inquiry, abnormal alarm, etc. are all completed by the access control system.
At the same time as the development of the door industry, access control systems have also become commonplace. The brands of access control systems are also emerging on the market. In the end, what brand of access control system is good, consumers have to use the final say, based on market research, summed up the top ten brands of access control systems, including: Siemens, Shenzhen Dashen, Shenzhen Kesong Electronics, Israel dds security access control, Shenzhen Mengili Ingersoll-Rand, Shenzhen Jieshun Technology, Shenzhen Oupin (OPEN) Division, Hangzhou Cubic, China Control Technology. These brands all have reliable strengths to provide customers with advanced and safe information platform.

Access Control System Price

Access control systems are electronic products. Unlike simple household items, there are many indicators that are used when selecting an access control system. The type, capacity, identification method, size, speed, etc., are all parameters that you need to consider when choosing an access control system. The following is a brief introduction to the three types of access control systems, prices, for your reference only:

1, Wahaya ES282-P

Brand:Wanmoto ES282-P

Product Category:Access Control System

Authentication method: fingerprint

Capacity: 10000 pieces

Verification speed: <0.7 seconds

Communication Interface: USB, TCP/IP

Supply voltage: DC 12V

Size: 80x160x35mm

Other features: Using 3D living technology

Price: about 2980.00 yuan

2, Huaben C22

Product Brand: Huaben C22

Authentication method: IC card, fingerprint, password

Storage capacity: 2000 fingerprints

Verification speed: 0-999 seconds adjustable

Reader type: IC card

Supply voltage: DC 12V

Product Size: 137×94×47mm

Applicable environment: -40-70°C

Other features: support for embedded database, synchronous real-time clock, history query, level 2 login permissions

Other parameters: Support Simplified Chinese, English

Applicable lock type: electronically controlled lock, electromagnetic lock, electric plug lock

Reference price: 758.00 yuan

Note: This price is for reference only! Due to geographical differences, of course, the price will be different. For more details on the prices, please refer to the local distributors!

Different from the traditional fingerprint access control all-in-one, the Watanabe C22 controller is installed separately from the fingerprint scanner. The division of labor cooperates to ensure indoor security. In addition to fingerprint recognition, it supports IC card and password recognition, and can store 2000 fingerprint information. , The verification speed can be adjusted according to the user's needs: 0~999 seconds adjustable. In terms of software management, the product supports embedded database; open time permission can be set flexibly, and historical records can be queried.

Huaben C22 controller has the characteristics of large storage capacity and no power loss. It supports Chinese and English languages ​​and is easy to operate. The most important thing is that this product has low power consumption and is an energy-saving and environment-friendly access control product.

Access Control System Design

1. The schematic diagram is a schematic diagram of the structure of a control point of a door. An AC220V socket must be left near each door as a power take-off port. An 8-core super five cable (usually a computer network cable) must also be installed to the nearest LAN switch or HUB as the network cable. These two tasks must be done. If the access control system uses the 485 local area network connection method, it needs to use twisted pair shielded wire to ensure the stability of the communication system. If the access control system adopts the TCP/IP communication method, the type 5 network cable is selected as the communication wire. Ensure the normal communication of the system.
2. For the occasion of frequent power off can be equipped with their own batteries, battery capacity determines the length of time after the use of breakpoints, for the occasion does not often power off the battery can not be installed.

3. The door magnet is a sensor that detects the door open/close state. If a door magnet is installed, the door's switch action and the door's state can be seen on the local area network management computer. Similarly, if it is a remote Internet control management, you can see Thousand kilometers away from the opening and closing of the door and the state of the door. If the user does not need to be installed. Magnetic wire can be used two-core wire.

4. The exit button can directly control the opening of the door. When the controller is pressed gently, the door opening action is performed. The exit button can be installed in parallel as required. The exit button is generally installed at the front desk reception and security office so that the door can be opened for the guest without going to the door. If the user does not need to be installed. The wire for the exit button can use two wires.

Access control system installation

The first step: Read the installation of front-end equipment such as the card area and the power box. The operator first installs a card reading device at the entrance, taking care to ensure that there will not be a strong magnetic field in the reader sensing range, such as monitors, heavy-duty motors, etc. Then set the control box and power box. The control box should be installed in the weak electric well environment. To facilitate the maintenance of the access control system in the future. Next, set the exit button and electromagnetic lock outside the door frame.

The second step: control equipment installation. The operator first installs the control panel and host of the access control system on the wall, and then sets the alarm device. In addition, the access control system should be continuously powered, and operators should use UPS power for centralized power supply.

The third step: line installation. China has issued specifications for construction and acceptance of electrical installations. Operators should conduct system wiring in accordance with this specification. In order to ensure that work does not interfere with each other, the lines of the access control system and other system lines should not be placed in the same pipe. The connection of the circuit is preferably set in the junction box, and the number of lines is preferably more than five, and the cable is wrapped with an insulating tape after the knot. When the line passes through the deformation gap, the two ends must be fixed and leave extra wires.

The fourth step: installation and debugging. After the installation of the access control system, the operator must perform relevant debugging to determine the system has no loopholes. The operator connects the sensor to the host computer. First, the access control sensor is independently tested and there is no problem. Then another line is detected until all lines are detected without problems.

Editor's summary: The main function of the access control system is to provide you with safe, convenient and efficient management. Each product has its own characteristics. Consumers can choose the right access control system according to your needs when purchasing.

Renovation Installation Heating Installation Access Control System Hydroelectric Installation Construction Installation